From Sample Board to Final Seam in Frankton
Frankton Metal Roofing provides metal roofing to homeowners, farm owners, and commercial property owners across Frankton, from standing seam upgrades to storm damage repair. Licensed and insured in Indiana, we offer free on site inspections and written estimates so Frankton property owners know exactly what the roof needs before any work starts.
If we're busy helping someone else and miss your call, we'll call you back within 15 minutes.
Considering metal in Frankton? Frankton Metal Roofing lays out panels on paper, prices by gauge and finish, and tells you when shingles fit the budget better. Call (812) 515-1567.
- Services: commercial metal roofing, standing seam metal roofing, metal roof repair, metal roof replacement
- Service area: Frankton, Madison County, IN and surrounding areas
- Response: Active metal roof leaks in Frankton get priority service; seam and fastener repairs scheduled fast
- Licensed and insured (License #RC21100059)
- Serving Frankton, IN since 2018
Schedule Your Free Roof Inspection
A proper metal roof inspection in Frankton is more than a glance from the driveway. Our crew walks the roof and checks panel seams for separation, fasteners for backing out or loose washers, flashings and penetrations for gaps, and the finish for chalking, fading, or coating failure on older panels. We look for hail dents, wind lifted edges, and any signs the roof has been stressed by a recent storm. Every finding is documented with photos so you see what we see. This matters because small metal roof problems in Frankton get worse the longer they sit. A loose fastener today can become a leak and interior damage after the next storm rolls through.
I agree to be contacted by Frankton Metal Roofing regarding my inquiry.
The Indiana freeze thaw cycle works on metal roofs at their joints. Panels expand and contract with every swing, and details that were installed rigid, screwed tight through slots meant to float, crack their sealant and fatigue their fasteners season by season. A Frankton metal roof detailed for movement lasts decades. One detailed like a shingle roof starts complaining within a few winters across Madison County.
Frankton Metal Roofing coordinates solar attachments on Frankton metal roofs before the racking crew improvises them. Standing seam clamps that grip ribs without penetration, load paths that land on structure, and documentation that keeps the roof warranty alive where the array begins. A Madison County metal roof can carry panels for decades, but only if the attachment plan respected whose roof it is.
Hail moved through Madison County? Frankton Metal Roofing assesses Frankton metal roofs panel by panel and tells your insurer the truth in both directions, documented with photos and impact maps carriers can approve. If the damage is real, the file proves it. If it is cosmetic, you will hear that too. Call (812) 515-1567 for an assessment worth exactly what it says.
Payment Options That Work for You
A metal roof project is worth doing right the first time. Financing options through Frankton Metal Roofing lender partners help you pay over time instead of cutting scope or delaying the work.
Pay for your project at a later time, but lock in today's pricing. Ideal for homeowners waiting on insurance settlements.
- No payments for 12 months
- No interest if paid in full
- Lock in current pricing today
Divide your project cost equally across 12 months with zero interest. Most homeowners choose this option for predictable budgeting.
- Equal monthly payments
- 0% interest for 12 months
- Simple, predictable budgeting
Spread your investment over up to 20 years with fixed equal payments. The right choice for larger projects or homeowners who prefer lower monthly amounts.
- Up to 20-year terms available
- Fixed equal payments
- Ideal for larger projects
Financing provided by Regions, Foundation Finance, Slice. Subject to credit approval. Rates, terms, and promotional periods are set by the lender and disclosed in writing before you sign.
What Frankton Property Owners Call Us For
From inspections and repairs to full replacements and new panel installations, Frankton Metal Roofing handles every metal roofing project with manufacturer-certified crews and clear documentation.
Commercial Metal Roofing in Frankton
Metal roofing services for commercial buildings in Frankton, including new installs, replacements, and repairs on standing seam and exposed fastener systems. Scoped and estimated in writing before work begins.
Learn moreStanding Seam Metal Roofing in Frankton
Installation and repair of standing seam metal roofs on Frankton homes and buildings, with concealed fasteners and factory formed panels for long term performance against wind and thermal movement.
Learn moreMetal Roof Repair in Frankton
Targeted repair of leaks, loose or backed out fasteners, damaged panels, and failing flashings on existing metal roofs across Frankton. Repair scope is documented with photos before work starts.
Learn moreMetal Roof Replacement in Frankton
Full tear off and replacement of aging or storm damaged metal roofs in Frankton, including new underlayment, panels, flashings, and trim. Written scope covers every component being installed.
Learn moreMetal Roof Installation in Frankton
New metal roof installation on Frankton homes, additions, outbuildings, and commercial structures. Includes panel layout, underlayment, flashings, and trim installed to the panel system's specifications.
Learn moreMetal Roofing in Frankton
Complete metal roofing services for Frankton property owners, from initial inspection through installation, repair, or replacement of residential, commercial, and agricultural metal roof systems.
Learn moreEmergency Metal Roof Repair in Frankton
Prompt response for active leaks, storm lifted panels, and other urgent metal roof failures on Frankton properties. We stabilize the roof, document conditions, and scope permanent repairs.
Learn moreStorm Damage Metal Roof Repair in Frankton
Repair of hail, wind, and storm related damage to metal roofs in Frankton, with photo documentation and a written scope suitable for your insurance carrier and adjuster.
Learn more
Local Expertise, Real Results
Site cleanup on a metal job means magnets over the lawn, every day.
Two metal bids can look identical and be two different roofs. Frankton Metal Roofing itemizes what a low bid usually hides: panel gauge, finish grade, clip type, and underlayment, so Frankton owners compare systems instead of prices. Once the details are in writing, the cheap bid usually explains itself.
Frankton Metal Roofing was founded by Aaron Christy in 2018 and serves Frankton, the wider Madison County area, and nearby communities like Anderson, Elwood, Alexandria, Lapel, and Noblesville. Metal roofing has been the core of our work since day one, from residential standing seam to exposed fastener panels on outbuildings along the edges of Frankton where farmland meets town. Our crews are local to central Indiana, licensed under RC21100059, and insured. Aaron has been featured on FOX59, WISH TV, and RTV6 discussing roofing work in the region. When a Frankton property owner calls, they get people who know Madison County roofs.
Every project in Frankton starts the same way. A crew member walks the metal roof, checks the panel seams, the fasteners, the flashings, and the ridge, and takes photos of anything that looks worn, lifted, dented, or improperly installed. You get a written estimate with a clear scope, itemized so you can see what you are paying for and why. When we do the work, we protect the property, keep the site tidy, and hand you a finished metal roof that was installed the way the panel system was designed to be installed. No shortcuts, no vague line items.
Our Promise
Three things every Frankton property owner gets from Frankton Metal Roofing. First, a free on site inspection of the metal roof before we ask you to commit to anything. Second, an honest written estimate with clear line items, so there are no surprise charges once the crew is on the roof. Third, clean workmanship backed by a workmanship warranty alongside the standard manufacturer coverage that applies to the panels and coatings installed. Straightforward work, documented start to finish.
Why Frankton Farms and Homes Call Us
Serving Frankton and Madison County with quality materials, thorough inspections, and transparent pricing.
Storm And Hail Response
When storms track across the flat Madison County terrain, metal panels take direct hits from hail and straight line wind. We prioritize storm calls, get on the roof, and document dents, seam separation, and lifted panels with photos. You get a clear picture of what happened and what it will take to make the roof sound again.
Local Frankton Experience
Frankton has a mix of older homes, ranch builds, mobile home retrofits, and farm outbuildings, and each one calls for a different metal roofing approach. We have worked on all of them across Madison County. That means the estimate matches the actual roof, not a template.
Full-Scope Metal Roofing
From the first inspection to the final walkthrough, one crew handles the job. Standing seam installs, exposed fastener repairs, full replacements, and emergency patching after a storm are all in house. Frankton property owners deal with one team, one estimate, and one point of accountability.
Insurance Documentation Done Right
If a storm damaged your metal roof, the claim lives or dies on the documentation. We photograph the damage, note the storm date, and provide a written scope your insurance carrier and adjuster can actually use. That paperwork keeps the process moving instead of stalling.
Real Jobs. Real Results.
Photos from recent metal roofing projects completed by our manufacturer-certified crew across Frankton and Madison County. Every project is documented with photos and a written closeout package.
What Frankton Owners See Us Do
It starts with the inspection. A crew member comes to your Frankton property, walks the metal roof, and looks at the panels, seams, fasteners, flashings, and any spots the last storm might have hit. We photograph anything that stands out, whether that is a dented panel, a lifted edge, or fasteners that have worked their way loose over time. Before we talk numbers, you get a clear read on the actual condition of the roof. Nothing is scoped until we have physically been on it.
Next comes the written estimate. You get itemized line items covering materials, labor, and any accessories the metal roof system needs, no vague bundles. If the damage is storm related and you plan to file a claim, we document everything the way your insurance carrier and adjuster will want to see it. works with your insurance carrier, and we do not tell you what your policy covers, but we make sure the Frankton claim paperwork reflects what the roof actually needs.
Then the work. We schedule around your calendar, deliver materials, and protect landscaping, siding, and windows before panels start coming off or going on. The crew works cleanly, keeps the site organized day to day, and cleans up debris and stray fasteners before leaving. At the end, we walk the finished metal roof with you, point out what was done, and answer any questions before we hand the Frankton project off as complete.
Free on site Inspection
A crew member comes out, walks the metal roof, and documents condition with photos. You see what we see, including panel, seam, and fastener detail. No obligation to move forward.
Honest Written Estimate
You get an itemized estimate with a clear scope of work. Materials, labor, and accessories are broken out so nothing is hidden. Questions get answered before anything is signed.
Insurance Documentation
For storm damage in Frankton, we document the roof condition with photos and a written scope your insurance carrier and adjuster can work from. We coordinate with the adjuster on site when helpful. works with your insurance carrier.
Clean Work, Final Walkthrough
The crew protects the property, keeps the site tidy, and cleans up fasteners and debris at the end of each day. Once the metal roof is finished, we walk it with you. You approve the work before we call it done.
Recent Frankton Metal Roofing Projects
3 before-and-after projects documented for the property owner and the property insurance carrier.
What we see most often on Frankton metal roofs
Frankton property owners typically call us about these scenarios.
Cut Edges, Filings, and Dissimilar Metals
Steel panels rarely rust out in the middle of the field. They rust where the coating stopped: a field cut edge, a drilled hole, a scratch from a dropped tool, or hot filings left on the finish after someone cut a panel with an abrasive wheel. They also rust where copper, lead, or runoff off treated lumber sits against them.
Pitch Pans and Curb Flashing Drying Out
Every penetration is a detail somebody built by hand · a pitch pan packed with sealant, a curb with a saddle behind it, a pipe flashing clamped over the ribs. Pans go quietly, because the fill shrinks below the rim where you cannot see it from the ground. Topping one off is maintenance. Rebuilding the detail is what it costs when nobody looked for years.
Trim Pulling Loose Along the Rake
Rake trim, ridge cap, and eave trim take the same thermal movement the panels do, joined by laps holding on with butyl tape and a handful of fasteners. Over the years the laps open, the butyl skins over and quits sticking, and a length of trim starts rattling in a west wind. It is not a leak the day it starts. It becomes one when that lap feeds water behind the panel end.
Wind Working the Eave and Rake Edge
Uplift runs highest at the perimeter, so a metal roof that loses something loses it at the eave or up the rake first. The panel hem hooked over a cleat is what holds that line down, and if the hem never fully engaged or the cleat fasteners were spread too far apart, wind finds it and peels from there.
Metal Roof Leaking at the Screws
On exposed fastener systems every screw is a hole in the roof held closed by a gasket, and Frankton freeze thaw cycles crush those gaskets years before the panel wears out. Water follows the shank into the decking and shows up as ceiling stains rooms away. Frankton Metal Roofing re-fastens with upsized screws, replaces failed washers, and checks decking moisture before closing anything up.
Dented Pans From Foot Traffic
Footprints across the flat of a panel are somebody who walked where the metal had no support under it. The pan between the ribs is the weakest place on the roof, and a satellite installer or a chimney sweep can leave a line of dents that will not come back out. Walk near the ribs and over a rafter, or better, stay off it.
Three Simple Steps
From free inspection to project completion, we follow a disciplined process on every Frankton metal roofing project.
Free Inspection
We review your metal roof, document conditions with photos, and explain findings in direct, practical terms. Inspections are scheduled at a time that works for you.
Transparent Estimate
A written outline detailing the recommended work and how each item benefits your property. No pressure. We explain options at a comfortable pace.
Quality Installation
Crews who work attentively, follow consistent timelines, and respect your property. Manufacturer warranty registration handled in your name.
What Frankton Metal Owners Reported After the Storm
4.9 stars across 2,307+ Google reviews.
"The certifications are real and the work backs them up. Paint and workmanship warranties registered in our name with all documentation delivered."
"Easy to work with. Professional crew. Clean job site. Documentation delivered as promised."
"Asphalt to metal conversion on our home. They handled tear-off, deck repair, and the new standing seam install over four days. Manufacturer warranty in our name."
"Honest assessment. They told me my existing metal roof had another 10 years if I addressed two flashing issues. Most contractors would have pushed replacement."
"Commercial standing seam retrofit on our office building. The property manager coordination was excellent, tenants had minimal disruption, and the closeout package was clean."
Frankton Metal Roofing Questions
Straight answers to the questions Frankton property owners ask most.
Indiana Weather Affects Metal Roofs Year Round
Indiana sees some of the most varied weather in the country. Frankton property owners deal with spring hail and severe thunderstorms, summer UV exposure, fall wind storms, and winter freeze thaw cycles. Understanding these patterns is how we plan maintenance, repairs, and replacement work.
Hail Denting Panels
Hail moving through Madison County can dent metal panels and bruise the protective coating even when the roof still sheds water. Over time those bruises turn into rust points and premature finish failure. When we are called out after a hail event in Frankton, we photograph every impact zone and flag panels that need replacement versus panels still within acceptable tolerance.
Wind Lifting Panels
Frankton sits on open, flat ground with minimal wind break topography, so straight line winds hit roofs at full strength. That pressure lifts panel edges, loosens fasteners, and stretches seams on standing seam systems. We check every edge, ridge, and rake for movement and re secure or replace what the wind compromised.
Fasteners Backing Out
Metal roofs expand and contract with every hot day and cold night, and over the years that thermal movement walks exposed fasteners right out of the deck. Once a fastener backs out, the washer no longer seals and water finds its way in. We replace worn fasteners with correctly sized, gasketed screws and check the surrounding panel for any oval ing at the hole.
Finish And Coating Wear
Older metal roofs across Frankton show chalking, fading, and coating breakdown, especially on south facing slopes that take the most sun. Once the coating is gone, the substrate is exposed and corrosion follows. We assess whether the roof can be recoated or whether the panels are past service life and need replacement, and we lay out both options in writing.
Choosing the Right Metal Roof for Frankton
An honest breakdown of the three panel systems we install most frequently.
The most common metal roof choice for Frankton homes is an exposed fastener steel panel system. It is affordable, installs efficiently, and holds up well against Madison County wind and hail when installed with the right underlayment and screw pattern. Homeowners like the long service life compared to asphalt shingles, the range of color options, and the straightforward look on ranch and traditional home shapes common across town. It is a strong middle ground option for owners who want metal without the premium price of standing seam.
A step up for Frankton owners is a heavier gauge steel panel with an upgraded coating system, often a PVDF or Kynar based finish. The thicker gauge resists hail denting better, and the upgraded coating holds color and gloss for decades instead of chalking early. It is worth the added cost if your property is fully exposed to Frankton wind, sees regular hail, or if you plan to stay in the home long enough that a longer service life pays back the upfront difference.
For a premium long life option, standing seam metal roofing is the top tier available in Frankton. The fasteners are concealed under the raised seams, which eliminates the most common failure point on exposed fastener systems and gives the roof a cleaner, modern look. Standing seam handles thermal movement better and typically outlasts other metal systems by a wide margin. The tradeoff is a higher upfront cost and a more involved installation, but for owners staying long term it is often the last roof the property will need.
Serving Every Part of Frankton
Metal Roofing projects completed across Frankton's neighborhoods and surrounding areas. Click any neighborhood for the specifics we have learned working there.
Where we respond near Frankton
Indiana-licensed crews dispatched to Frankton and the closest surrounding communities.
Metal Roofing Systems Compared in Frankton
Quick reference for the four metal systems we install most often. Pricing reflects typical Frankton installations.
Typical Frankton market ranges as of 2026. The plus sign on upper numbers means your project may exceed the listed maximum based on inspection findings. Get a written scope and quote at no cost.
Frankton Metal Roofing is powered by Indy Roof & Restoration
When you call, Indy Roof & Restoration answers. When work starts, their crew shows up. When it is done, their warranty holds. Since 2018, their crews have worked central Indiana through every storm season, and Frankton sits squarely in that footprint. The proof is public: 2,307+ verified Google reviews, 4.9 stars, one of the strongest ratings of any contractor in central Indiana.
Licensed and insured · License #RC21100059
The shop holds Owens Corning Preferred Contractor, Malarkey Certified Contractor, BBB A+ Accredited and Google Google Guaranteed. Their work has drawn coverage from FOX59, WISH TV, and RTV6.
Expert Frankton Metal Roofing Crews Available Now
Whether a recent storm knocked your metal roof around, your panels are showing their age, or you are planning ahead for a Frankton property, the next step is simple. Schedule a free on site inspection with Frankton Metal Roofing, no obligation, and we will document everything you need for your claim or your decision.